Lift Assembly Instruction
- Zhengzhou Yangfan Ventilation Equipment Co.,Ltd
- product brand:Yangfan Ventilation
- Numéro de stand：B2K35N7B27
- product specification:
- product category:Tools and Equipment for Refrigeration and Air Conditioning-Tools for the refrigeration and air conditioning industry-
- product introduction:Lift Assembly Instruction
1.Introduction:
a. Lifting height: the whole vertical pole is made of 0.5m and 1m extension poles. The lifting height can be adjusted by adjusting the number of extension poles. 4 meters high as standard. The extension bar can be turned 90°and automatically limited after being erected to prevent backward tipping. (at present, the commonly used lifting height is 4m, 5m, 6m and 7m).
b. Lifting weight: 300 kgs or 650 kgs.
c. Size and weight of Lift: Chassis size is 1.5m * 0.86m. Chassis is 0.2m from the ground, and total weight is about 190kgs.
d. Motor parameters: voltage: 220 V, power: 1.8kw
e. Optional device: The normal control mode of this lift is the button switch controlled by wire. Can be equipped with remote control and anti falling device.
f. Others: Standard load-bearing basket, The column is made of high-quality alloy seamless steel pipe with diameter of 60mm. The casters are polyurethane anti winding bearing wheels. A single wheel bearing capacity is 500kgs. The diameter of windlass wire rope is 8mm.
2.Features:
a. The air pipe and water pipe can be installed without chain block (chain block). The speed is much faster than chain block, avoiding manual lifting and reducing labor intensity.
b. Light weight and easy to move.
c. Self-locking can be stopped at any height during the lifting process, safe and efficient.
3. Manufacturer:
Zhengzhou Yangfan Ventilation Equipment Co., Ltd.
Tel: +86-371-64818808, +86-13503869038
Video viewing is available at website: www.yangfanm.com
Specification of Electric Lift
S/N Item Type Unit Motor Power
(220V) Lifting weight (kg） Remark
1 Standard lift 4m set 1.8kw 300 The poles contain 0.5m long 2 pcs and 1m long 2 pcs . The rack is equipped with 1m reversible pole, 4 meters in total. In actual use, the number of poles can be adjusted according to the construction site height. If the height is not enough, the pole can be added. Two 1m poles can be increased to 6m. The vertical pole is 60x4mm alloy seamless steel pipe.
2 Standard heightening lift 4.5m set 1.8kw 300 Equipped with load-bearing basket
3 5m set 1.8kw 300
4 5.5m set 1.8kw 300
5 6m set 1.8kw 300
6 Nonstandard Lift 7m set 1.8kw 300 With 2 telescopic legs and 1 steel tube brace
7 Nonstandard Lift 8m set 1.8kw 300 With 4 telescopic legs and 2 steel tube braces
8 Customized Lifting weight 650kgs Lift set 6m or under 6m height lift can be customized to load 650 kgs
9 Optional remote control set Industrial remote control
10 Optional anti falling device set
