Hybrid Cooler
- SHANGHAI BAOFENG MACHINERY MANUFACTURING CO.,LTD.
- product brand:SPL
- Numéro de stand：E3B47
- product specification:GSF
- product category:Miscellaneous-Wholesalers-
- product introduction:The Combination Evaporative Cooler is equipped with: tube bundles, spray water distribution device, snake-shaped coils, drift eliminator and water basin at the bottom. Outside casing there is a circulating water pump, an electronic descaling device, and an axial flow fan at the top of the condensing coil. When working, the cooling water is sent to the nozzle above the condensing coil by the pump and sprayed evenly on the outer surface of the condensing coil, forming a very thin water film. After the axial flow fan leads the air, the air enters the equipment from the lower side of the case (since the air enters from the lower part , and comes from the top, air flow and spray water are running in the opposite direction, so called counter flow). This type of flow enhanced air flow, form a negative pressure inside, promote lower water evaporation temperature, promote water film to evaporate, strengthen the heat release of the condensation coil. The high-temperature liquid is precooled through the finned tube bundle, and then enters into from the upper collecting tube of the snake-shaped condensing coil, and the condensed liquid of the cooling water outside the pipe flows out from the lower collecting tube of the condensing coil. After the water absorbs the heat of the refrigerant, part of it evaporates into water vapor, which is absorbed and discharged into the atmosphere by the axial flow fan. The cooling water that has not been evaporated and the introduced fresh air is exchanged for heat, and then drips onto the lower water collection tray for circulation use by the water pump.
